KGS will be attending IEEE EMC & SIPI on 8/6 – 8/8, 2024
Kitagawa Industries America will have a booth (#618) at IEEE EMC & SIPI 2024 in Phoenix, Arizona! Featured will be EMC essentials (such as ferrites, shielding films, and SMT grounding contacts) as well as thermal management products.
Come check us out!
IEEE EMC & SIPI
Phoenix Convention Center.
100 N 3rd St, Phoenix, AZ 85004
Booth 618
Exhibit Hours
Aug 6 (Tue): 9:30 AM ~ 7:00 PM
*Welcome Reception: 5:00 PM ~ 7:00 PM
Aug 7 (Wed): 10:00 AM ~ 5:00 PM
Aug 8 (Thu): 10:00 AM ~ 1:00 PM
Many applications today such as optical, medical, and sensor devices certain requirements preventing them from using silicone based products. To meet these demands, KITAGAWA INDUSTRIES America offers a variety of silicone-free thermal pads. We use an acrylic rubber base to eliminate any concerns of siloxane outgassing and oil-bleeding. Our silicone-free thermal pads are very soft which is beneficial for reducing applied stress on the PCB and lowering the thermal resistance.
EMC grounding is one of the most cost-effective ways to reduce EMI noise at the board, cable, and system levels. The most ideal EMC ground is a short and wide connection with low impedance, especially when grounding problematic frequencies above 200 Mhz. Some examples include SMT spring contacts and snap-in grounding spacers for PCBs, 360° metal clamps for cables (primarily to ground the shielding on the cable), and grounding straps for cables and enclosures.
Please feel free to contact us with any questions regarding the above products. There is live chat on this site.
