Ni-Zn Ferrite Clamp – KRFC Series
Split-core ferrite clamp designed to filter noise from around 3 ∼ 50 MHz NEW!
- Effective suppression of conducted noise up to 30MHz and radiated noise over 30MHz
- Cable tie loop can assist to fix ferrite clamp to wire harness (except for KRFC-4 )
- Notches on both sides of the inner side of the plastic clamp prevent wires from shifting out of place when winding
- Operating temperature: -20 ~ 85°C
- White plastic case made of PA66 material
- UL94 V-0 Flammability rated housing
KRFC Series: Part No.
|Part No.||Unit: mm||Applicable
|KRFC-4||13.7||13.5||27.5||-||Φ3.5 ~ 4.5|
|KRFC-6||18.1||18.4||31.5||35.5||Φ5.5 ~ 6.5|
|KRFC-8||20.1||20.4||31.5||35.5||Φ7.5 ~ 8.5|
|KRFC-9||20.1||20.4||31.5||35.5||Φ8.5 ~ 9.5|
|KRFC-10||26.3||26.4||32.4||37.2||Φ9.5 ~ 10.5|
|KRFC-13||29.1||29.4||31.5||36.3||Φ12.5 ~ 13.5|